 |
 |
 |
 |
 |
 |
 |
 |
ISOtanks WorldWide LLC
P.O. Box 450618
Houston, TX.
77245-0618
Phone:
713.433.8988
Fax:
713.433.9976
Toll Free:
877.476.8657
Email Us
| Dimension |
mm |
ft |
in |
Capacity |
Liters |
Imperial |
U.S. Gallons |
|
| Length |
6,058 |
20' |
0" |
|||||
| Width |
2,438 |
8' |
0" |
25,000 |
5,499 |
6,015 |
||
| Height |
2,591 |
8' |
6" |
| Shell Material | Stainless steel, A 240-316 (316 S33) | Frame Material | Structural steel to BS 4360 Grade 50C. | ||||||||||||||
| Shell Thickness | Shell and ends 4.88 mm and 5.70 mm respectively. |
External Vacumm Pressure | 0.41 Bar (5.9psi) | ||||||||||||||
| Test Pressure | 6 Bar (87.0 psi) |
Working Pressure | 4.0 Bar (58.0 psi) | ||||||||||||||
| Design Temperature | 110° C (230° F) | Design Code | ASME VIII Division 1 | ||||||||||||||
| External Finish | Framework shot blasted to SA 2.5, primed and painted one coat of vinyl co-polymer resin. |
Internal Finish | Better than 180 grit, bare circumferential welds ground flush and the total interior acid cleaned. |
||||||||||||||
| Fitting Manlid | 500mm, fully hinged with 6-point fixing positioned on the longitudinal center line. |
Air Line | 2" stainless steel butterfly valve fitted with an integral flame arrester. Terminates in a 2" BSP dust cap with a retaining wire. Facility for pressure gauge connection exists. | ||||||||||||||
| Top Outlet | 3" nominal bore with removable siphon tube, 3" butterfly valve and 3" table 'D' blank flange. |
Bottom Outlet | 3" 45° stainless steel foot valve with remote closure, 3" stainless steel PTFE sealed butterfly valve terminating in a 3" Table 'D' blank flange or a 3" BSP male outlet. | ||||||||||||||
| Insulation | 48mm thick polyurethane/rockwool insulation. Complete outer cladding of white GRP with all joints sealed and covered by stainless steel strips. |
Steam Heating System | Comprising seven runs of V-type stainless steel ducts giving an effective heating area of 7.5 sq. meters (80 sq. ft.). 4 bar (58 psi) working pressure with 1 1/2"/ 3/4" BSP inlet/outlet connections respectively. | ||||||||||||||
| Top Compartments | All top fittings are housed in two stainless steel spill boxes complete with drain tubes. | Thermometer | Limpet-type digital thermometer fitted t rear of the tank. | ||||||||||||||
| Approvals | Lloyds, ADR/RID, IM101 (US) DOT, (UK) DOT, IMO Type 1, UIC, TIR, CSC, AAR 600, TC Impact Approved, FRA, DIR (Australia). | Safety Refief Valves | Two 2 1/2" BSP "Super Maxi" high flow pressure relief valves set at 4.4 bar (63.8 psi). Facility exists for fitting bursting discs and pressure gauges. | ||||||||||||||
|
|||||||||||||||||
|
|
|
|
|
|
|
|