 |
 |
 |
 |
 |
 |
 |
 |
ISOtanks WorldWide LLC
Phone:
713.893.3950
Hong Kong:
+852.8191.5750
Click here to Email Us
| Dimension |
mm |
ft |
in |
Capacity |
Liters |
Imperial |
U.S. Gallons |
|
| Length |
6,058 |
20' |
0" |
|||||
| Width |
2,438 |
8' |
0" |
23,000 |
5,099 |
6,076 |
||
| Height |
2,591 |
8' |
6" |
| Shell Material | Stainless steel, 316Ti | Frame Material | Structural steel to BS 4360 Grade 43C | ||||||||||||||
| Shell Thickness | Shell and ends 3.01 mm. |
External Design Pressure | 0.41 Bar (5.9psi) | ||||||||||||||
| Test Pressure | 2.63 Bar (38.1 psi) |
Working Pressure | 1.75 Bar (38.1psi) | ||||||||||||||
| Design Temperature | 100° C (212° F) |
Design Code | ASME VIII Division 1 | ||||||||||||||
| External Finish | Framework shot blasted to SA 2.5, painted with one coat of vinyl co_polymer resin. |
Internial Finish | Better than 180 grit with all welds ground flush with the parent metal. | ||||||||||||||
| Fitting Manlid | 460mm, fully hinged with 6 point fixing positioned on the longitudinal center line. |
Air Line | 1 x1/2" BSP male threaded pipe complete with zinc dustcap and retaining wire. Facility exists for fitting a 1 1/2" BSP ball valve. | ||||||||||||||
| Top Compartments | All top fittings are housed in a stainless steel spill box complete with drain tubes. |
Bottom Outlet | 3" 45° stainless steel foot valve and a 3" stainless steel PTFE sealed ball terminating in a 3" BSP male outlet with cap and retaining chain. | ||||||||||||||
| Insulation | 50mm thick polyurethane insulation. Complete outer cladding of white GRP with all joints sealed and covered by stainless steel strips. |
Steam Heating System | Four runs of stainless steel ducts giving an effective heating area of 4.5 sq. meters (48 sq. ft). 2.65 bar(38psi) working pressure with 3/4" BSP inlet/outlet connections. | ||||||||||||||
| Top Compartments | All top fittings are housed in stainless steel boxes, complete with drain tubes, usually equiped with lids. | Thermometer | A probe type analog thermometer is fitted. | ||||||||||||||
| Approvals | Lloyds, ADR/RID, IM101 (US) DOT, (UK) DOT, IMO Type 1, UIC, TIR, CSC, AAR 600, TC Impact Approved, FRA, DIR (Australia). | Safety Refief Valves | 1 or 2 1/2" stainless steel pressure relief valves set at 4,4 bar(63.8psi). Facility exists for fitting bursting disc and pressure gauge. | ||||||||||||||
|
|||||||||||||||||
|
|
|
|
|
|
|
|