 |
 |
 |
 |
 |
 |
 |
 |
ISOtanks WorldWide LLC
P.O. Box 450618
Houston, TX.
77245-0618
Phone:
713.433.8988
Fax:
713.433.9976
Toll Free:
877.476.8657
Email Us
| Dimension |
mm |
ft |
in |
Capacity |
Liters |
Imperial |
U.S. Gallons |
|
| Length |
6,058 |
20' |
0" |
|||||
| Width |
2,438 |
8' |
0" |
17,000 |
3,850 |
4,623 |
||
| Height |
2,591 |
8' |
6" |
| Shell Material | 316L/LN or TI | Frame Material | Corten or other high tensile steel | ||||||||||||||
| Shell Thickness | Shell and ends 4.88 mm and 5.70 mm respectively. |
External Design Pressure | 0.41 Bar (5.9psi) | ||||||||||||||
| Test Pressure | 6 Bar (87.0 psi) |
Working Pressure | 4.0 Bar (58.0 psi) | ||||||||||||||
| Design Temperature | 93°- 110° C 200°- 220° F |
Design Code | ASME VIII Division 1 | ||||||||||||||
| External Finish | Framework shot blasted to SA 2.5, painted with Zn-rich primer and topcoat. |
Dipstick | Dipstick and calibration chart fitted at manhole. Dual liter/gallon readings. | ||||||||||||||
| Fitting Manlid | 500mm(20"), fully hinged with 6" or 8" point fixing positioned on the longitudinal center line. |
Air Line | 1 x1/2" stainless steel ball valve terminates in a stainless steel blind flange. Equiped with manometer. | ||||||||||||||
| Top Outlet | 3" stainless blind flange |
Bottom Outlet | 3" stainless steel foot valve with remote closure, 3" stainless steel PTFE sealed butterfly valve terminating in a 3" stainless steel pipe cap, with retainingwire. | ||||||||||||||
| Insulation | 48mm thick polyurethane/rockwool insulation. Complete outer cladding of white GRP with all joints sealed and covered by stainless steel strips. |
Steam Heating System | 7.5 sq. meters (80 sq. ft.) at 3 or 4 bar (43-58 psi) working pressure with pipe caps and retaining wires. | ||||||||||||||
| Top Compartments | All top fittings are housed in stainless steel boxes, complete with drain tubes, usually equiped with lids. | Thermometer | Dual scales in centigrade and fahrenheit. | ||||||||||||||
| Approvals | Lloyds, ADR/RID, IM101 (US) DOT, (UK) DOT, IMO Type 1, UIC, TIR, CSC, AAR 600, TC Impact Approved, FRA, DIR (Australia). | Safety Refief Valves | 1 or 2 1/2" stainless steel pressure relief valves set at 4,4 bar(63.8psi). Facility exists for fitting bursting disc and pressure gauge. | ||||||||||||||
|
|||||||||||||||||
|
|
|
|
|
|
|
|