 |
 |
 |
 |
 |
 |
 |
 |
ISOtanks WorldWide LLC
P.O. Box 450618
Houston, TX.
77245-0618
Phone:
713.433.8988
Fax:
713.433.9976
Toll Free:
877.476.8657
Email Us
| Dimension |
mm |
ft |
in |
Capacity |
Liters |
Imperial |
U.S. Gallons |
|
| Length |
6,058 |
20' |
0" |
|||||
| Width |
2,438 |
8' |
0" |
14,000 |
3,079 |
3,699 |
||
| Height |
2,591 |
8' |
6" |
| Shell Material | Stainless steel, A240-316-88C |
Frame Material | Structural steel to BS 4360 Grade 43C. | |||||||||||||
| Shell Thickness | Shell and ends BS4360 Grade 43C |
Working Pressure | 6.9 Bar (100 psi) | |||||||||||||
| Test Pressure | 10.3 Bar (150 psi) |
Ext. Vacuum Pressure | 0.41 Bar (5.9psi) |
|||||||||||||
| Design Temperature | 100° C (212° F) | Design Code | ASME VIII Division 1 'U' Stamp | |||||||||||||
| External Finish | Framework shot blasted to SA 2.5, primed and painted with hi-build chlorinated rubber. |
Internal Finish | Better than 120 grit with all surfaces chemically treated and passivated. |
|||||||||||||
| Fitting Manlid | 500mm, fully hinged with 10-point fixing positioned at the rear of the tank on the longitudinal center line. |
Air Line | 1 1/2" stainless steel ball valve with a 0-16- psi pressure gauge. Terminates in a 1 1/2" BSP dust cap with a retaining wire. | |||||||||||||
| Top Outlet | 3" nominal bore with siphon tube, 3" stainless steel butterfly valve and 3" blind flange. |
Insulation | 100mm thick polyurethane insulation. Outer cladding of 3mm thick GRP on the domes and 0.7mm thick stainless steel sheet on the barrel. Al joints are silicone sealed under stainless strips. | |||||||||||||
| Top Compartments | All top fittings are housed in two stainless steel spill boxes complete with drain tubes. |
Steam Heating System | Comprising five runs of stainless steel ducts giving an effective heating area of 3.15 sq. meters (34 sq. ft.). 4 bar (58 psi) working pressure with 1" BSP inlet/outlet connections respectively. | |||||||||||||
| Thermometer | Rototherm analogue thermometer fitted. | |||||||||||||||
| Approvals | Lloyds, ADR/RID, IM101 (US) DOT, (UK) DOT, IMO Type 1, UIC, TIR, CSC, AAR 600, TC Impact Approved, FRA, BAM, DOT51. | Safety Refief Valves | One 2 1/2" BSP "Super Maxi" high flow pressure relief valves set at 6.9 bar (100 psi). Fitting with a nickel bursting discs and 0-160 pis pressure gauges. | |||||||||||||
|
||||||||||||||||
|
|
|
|
|
|
|
|